What To Do With Old Modem And Router

What To Do With Old Modem And Router – Make everything better Shop Sign up Home Latest Technology Food Entertainment Health Money Home & Garden Relationships Parents Work Morning Commuting Life in general We may earn a commission from links on this site. Make Everything Better Home Latest Technology Food Entertainment Health Money Home & Garden Relationships Work Parents Prime Day Travel Life in General

It’s the most annoying scenario: you set up your router in your new house or apartment and your Wi-Fi works perfectly, until you discover that your downloads (or streaming) stop in an area that is outside of your router , like the exact one. place where you watch Apple TV on the couch, or play music on your desk, or eat movies in bed.

What To Do With Old Modem And Router

What To Do With Old Modem And Router

There are a few tricks you can use to get a little more range out of your existing gear. If your network equipment is old or you don’t want to deal with a lot of hassle, we usually recommend buying something new: a better router that supports the highest wireless speed that your devices can handle, a wifi network system with a dedicated backhaul connection. , or even a super cheap wifi extender if you just need one

The 3 Best Wi Fi Routers Of 2023

If you don’t want to spend a penny more in your setup, you have an alternative: use an old router to extend (or integrate) the wireless signal of your main router. You know the one – that trusty, retired workhorse you keep in case of emergencies (or out of laziness).

Instead of letting it collect more dust, you can repurpose your old router to increase your wireless range at home. This won’t be a perfect solution, especially if it’s an older wireless router trying to transition to the newer world of wireless power switching, but it can at least save you money and potentially give you better wireless performance. than a simpler extender. . Don’t lose, won’t you?

The best thing you can do with an old wifi router that you no longer use is to turn it into a simple wireless access point. As long as your house or apartment is wired for Ethernet (or you don’t mind running cables), it’s an easy way to connect wirelessly to an area that doesn’t already have one (or has a weak signal).

To begin, connect your old router (WAN port) to your new router (LAN port) and connect the device to your old router. Retrieve the settings of your older router – more on how to do it here – and look for some sort of “access point mode”, as it is commonly called. Depending on the router, this may be called “fashion mode,” which is a confusing term that we’ll talk about later in this article.

Old Routers Are Putting Your Business At Risk

What you are trying to do is disable the router’s DHCP server – how connected devices get their internal IP address from your router. If you don’t, you commit the network sin of managing a router in a router, which can cause problems with everything you do on connected devices.

Note: Performing this step will change the IP address you use to access the router settings through your browser if you go this route. You also need to reset your router and change the Ethernet cable from the WAN port to one of the LAN ports. To find the new IP address of your old router, drag it

Router configuration and look for the section where your router lists connected devices. Your older router must be one of them.

What To Do With Old Modem And Router

(You can also manually set your router’s IP address in its configuration screen if you prefer to remember it that way.)

Modem And Router Lights Meaning Explained

Place your router in the perfect location where you plan to expand your wireless capabilities, assuming you have a long enough Ethernet cable or wall wiring.

It is practical to configure the wireless networks of your old router with the same SSID and password as your existing wireless networks. I like to give them different names from my existing Wi-Fi networks (same password), because then I can decide which access point to connect to – the newest router or the oldest router.

For what; Because your devices are probably stupid and stick to a weaker wireless signal for too long, and your older router probably doesn’t support the ability to reject devices with a poor signal from the access point. Using separate SSIDs for your different routers means that you need to make sure that you are connected to the correct Wi-Fi network if you move from one to another a lot, but this is a minor problem to deal with to improve performance. . You don’t want your device to bind to your older router’s signal if your newer router’s faster wifi network is a better choice (or vice versa).

Check your router’s settings (or manual) to see if it has some sort of “wireless repeater”, “extender” or “bridge” – yes, that word bridge again, which router manufacturers like to use for things different

Best Cable Modems For Stable And Faster Internet

If you’re not sure whether or not you’ve selected the correct mode, check to see if your older router’s manual (or the feature description on the router’s user interface) says that this mode will allow to your older router to connect to

Which allows any other wireless client to connect. In this scenario, any devices you connected to your old router via Ethernet cables will join your larger network.)

If you think about it, this installation replaces the Ethernet cable from the previous step – the one that connects your new router to the old router – with a wireless signal. This type of configuration also comes with an important caveat: if you use your old router as a WiFi extender, you will cut your performance for connected devices in half. LearnTomato explains why:

What To Do With Old Modem And Router

“There is a drawback to using a wireless bridge in repeater mode and in WDS mode. If the secondary router transmits a wireless signal (instead of connecting the client’s computers with a cable), the wireless coverage in the secondary building will be cut in half. Each transfer is known as a “hop”. The second wireless hop is the one that takes the hit. […] Basically, wireless clients connected to the second router will not enjoy the same performance as “and the wireless clients connected to the first router. Why; Because the transmitter on the other router has to work twice as hard. It must first receive the signal from the primary router and then retransmit it to the wireless clients.”

Old Modem Internet Image & Photo (free Trial)

This is why you should always use an Ethernet connection where possible to connect access points to your main router. A wireless bridge may be more convenient, but your speed may be worse.

I might rename this column “Wizard of Wifi” considering how many of you have written with…

Chances are that your router, old (or cheap) as it is, does not have options built into the user interface that allow you to use it as an access point or extender. Resist the urge to throw this router in the recycling bin because you always have the chance to customize it to your liking. You’ll need to flash with third-party firmware-software you’ll interact with to change its settings-which can help unlock features you couldn’t play with before.

I like to use DD-WRT myself, but you can also try OpenWRT or Tomato, or even AdvancedTomato if you want a nicer UI. You need to do some research to see which firmware works with your particular router (if any), and be aware that your router may also have different versions. (This is something you’ll likely find with any third-party firmware if you look at the label on the bottom or back of your router.)

The Ultimate Guide To Understanding Routers

It is important to get the correct firmware and the correct version of that firmware for your particular router, as flashing your router with the wrong firmware could cause a host of problems that could take much longer to resolve. You can check support for your router here:

Since I’m practicing this on a TP-Link Archer C7, I decided to use good old DD-WRT. I started looking at the bottom of my router to confirm I had a “v2” hardware version, then downloaded the appropriate firmware (factory-to-ddwrt.bin) from the DD-WRT website.

I then went into the usual web interface for the Archer C7 – typing the default 192.168.0.1 into my browser – and went to the section I normally use to update the router’s firmware with the new image from TP-Link. Instead, I selected the DD-WRT .BIN file I just downloaded and let it copy.

What To Do With Old Modem And Router

As sometimes, the firmware update process did not accept an image that was clearly not from TP-Link. If this happens to you, don’t give up. I jumped on the DD-WRT forums, found a huge post about the Archer C7 router, and learned that I would probably have better luck flashing my router with the latest beta version of DD-WRT instead of what the router database site. . I did and… success!

How To Use A Spare Router As A Wifi Extender?

I then visited the Wireless tab in DD-WRT and looked for the “Wireless Mode” section for my router’s 2.4Ghz and 5Ghz radios. I clicked on the drop down box and…again nothing. There is no repeater function to select. As it turns out, the Archer C7

0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments