How To Fill Holes In Wood Paneling

How To Fill Holes In Wood Paneling – Wood paneling makes the space feel dark, cramped and outdated. Painting wood panels is a simple DIY project that can brighten up a room in no time! Here are my tips for tackling this home improvement project like a pro.

Rustic wood decor has recently become a rage in home decor, but the trend is nothing new. The 70s were full of wooden planks, which we now find old and dull. Today, I’m sharing my tips for painting wood paneling to brighten up a space and make it look modern!

How To Fill Holes In Wood Paneling

How To Fill Holes In Wood Paneling

This post is sponsored by Handy Paint Products and contains affiliate links for your convenience. Purchases made through these links earn me a small commission at no additional cost to you.

Spackling, Joint Compound, Epoxy: Which Is The Best For Filling Holes?

My workshop was a garage, and the walls were covered in black tongue and groove wood planks over the years, and I tried to hide it as much as possible.

I hung a “white carpet of doom and mystery” from the ceiling on the other side to protect things. Things covered with sawdust. It also includes an unfinished exterior wall.

I also nailed some extra OSB to the exposed wall when I installed my new wall dust collector in the corner.

But the back wall is covered with pipes and tubes and thus cannot be covered with boards or tarps. At the end of this session is my stand and a few shelves, covered in sawdust, even though I made a miter dust wall.

Wood Paneling Or Drywall Repair

This space needs updating and adding cabinet storage instead of open shelving. But when I took down all the shelves and saw the stand pulled from the wall, I thought it was time to burn it! Here are my tips for painting wood panels like a pro!

I love sanding as much as I want, but it makes a huge difference! If your wood paneling is painted and finished with a topcoat, the paint won’t adhere to it properly. You can read more about my tips for painting over polyurethane or varnish here. A quick sand will smooth the surface.

My workshop is a garage, and I’m pretty sure the tongue and groove boards are original to the house in 1946. It’s battered, and has stains on the bottom panels from being parked for so long.

How To Fill Holes In Wood Paneling

I used a cat sander to sand all the corners and get the natural wood. The triangular shape makes it easier to get into the groove.

How Do I Fix This Hole Knocked Into Wood Paneling?

For less damaged areas, I use a soft sanding sponge with an angled edge. A few freeways with corners in the ditch will get them going!

If your paneling is plywood rather than hardwood, you can try using a sander instead of sanding. Sanding too aggressively can result in no wood at all! I used a discloser before painting my melamine kitchen cabinets and it helped the paint adhere to the surface.

After sanding, apply wood filler or spackle to nail holes or scratches. Now the more careful you are in filling in the gaps, the better your end result will be!

All of these will create sawdust on the sand wall. Use a vacuum or vacuum the hidden dust and get it all out!

Painting Wood Paneling

If your walls are really dirty like mine, they need a quick clean too. I mixed a batch of TSP solution in a bucket and used a cotton mitt to clean the cracks and every crevice. It’s amazing how much dust is removed in just a few swipes!

I used TSP to clean everything off the tile floor before painting our aluminum surface. I’m always amazed at how well powerful cleaners work. ! Make sure you wear gloves because the degreasing agent will absorb all the oil from your hands!

Allow the board to dry completely before separating the paint. I pointed it at a high powered fan for a few hours and it was good to go.

How To Fill Holes In Wood Paneling

Trust me, no old primer will cover this dark wood! Tan’s water-based primer will bleed and turn your white walls orange in no time!

How To Paint Wood Paneling The Right Way

Although an oil-based primer can stop the tan from bleeding, it can dry out the fabric. I like to use a shellac-based primer like Zinsser B-I-N instead because it dries quickly and covers dark spots and blemishes with ease!

You should use both a brush and a roller for best coverage. I used a simple paint tray with a disposable pad to make it easy to switch between tools. Begin by pouring the primer onto the plate.

Use a brush to get the primer into the grooves between the boards. Work in small sections because this material dries quickly! I use the brush on two or three panels at a time.

A magnet on the end of the portable paint tray holds the paint at the correct height so excess primer rolls back onto the tray when switching to the roller.

Tips On Using Drywall Joint Compound As A Grain Filler For Oak Cabinets

I chose a 4 inch roller that is the same width as the flat part of the board. If your paneling is made of thin boards, a 9-inch-wide roller will help cover more surface area while minimizing edge cracking.

This wallpaper is so dry that it absorbs the first layer of primer right away! You can see it hiding in the tree. Two coats are needed to get decent coverage.

Some people like to brush before applying paint or primer, but I like to wait until the last coat of primer is dry. This makes it much easier to see gaps and cracks because they tend to stick out like sore fingers.

How To Fill Holes In Wood Paneling

Caulk can help seal gaps or cracks between boards while allowing for seasonal wood movement. As the air dries, the board shrinks slightly. Then, when the humidity is high, the board expands, revealing the wood with its original color in the cracks. We are now in our dry summer and I don’t want you to see a dark brown line when it starts raining again!

Hiding From The Laundry: Painting The Knotty Pine

Cut off the end of the paintable glue tube, then place it in the gun. Run a thin bead through each fold. Learn more about how to use a handgun here.

I like to use a wet shop towel (which is less streaky than regular paper towels) to smooth out the lines on my fingertips.

The final step in painting the wood is resin paint. I have an old white gallon that I like to use (who doesn’t like me saving half-empty cans?).

There’s still primer in the paint tray from yesterday and it’s dry solid. Luckily, I used a disposable towel so all I had to do was pick it up and throw it away! Cleaning is the worst part of painting (in my opinion), and I forget to do it all. Anything that helps me get past that stage is a win in my book!

How I Build My Painting Panels

Repeat the same technique of priming process. Use a paintbrush to get into cracks and crevices, then roll onto a flat surface. Keep a brush handy to catch any drips!

I did two coats to keep the wood dark. 🙂 Painting wood panels is amazing for being instantly modern without obscuring the character! Trying to decide between spackle vs caulk and wood filler vs caulk to fill holes and gaps in your DIY project? This beginner’s guide walks you through caulk, wood filler, wood putty, spackle, and compounding. Learn how to choose the right product with confidence!

Thanks to DAP for sponsoring this guide. All opinions are my own. This post contains affiliate links, but I won’t recommend any. Read my full explanation here.

How To Fill Holes In Wood Paneling

There are a variety of materials to fill holes and gaps in your DIY projects and around your home. Caulking, wood filler, wood putty, spackle, joint compound…just to name a few.

How To Repair Holes In Vinyl Siding

Whether you’re filling gaps in trim and baseboards or filling nail holes, weekend DIY home projects, remodeling, and woodworking projects require many finishing touches.

Caulk or caulking is a material used to fill gaps or seal joints between two materials. It is sold in a tube packed in a caulking gun, which is used to expel the weld into the seam. It is also sold in squeeze tubes.

Caulk is used to seal seams, joints and corners from water, insects, wind and/or water.

There are tons of different types for all genres

Wood Filler Vs Wood Putty

0 0 votes
Article Rating
Notify of
Inline Feedbacks
View all comments