How To Close An Inground Swimming Pool

How To Close An Inground Swimming Pool – When it comes to winterizing your pool, procedures can vary depending on the type and construction of your pool. Experienced pool builders and contractors know what it takes to properly prepare your pool for the season. While owning a pool comes with a lot of responsibilities, including winterizing your pool, it’s well worth it when the warmer months roll in and your pool is ready for use. In the winter, your well will help you avoid costly repairs, because pool maintenance is all about efficiency. Read on to learn the ins and outs of how to winterize a swimming pool, and don’t hesitate to contact us with any questions!

1. One week before closing the pool, add 14 fluid ounces of enzyme for every 10,000 gallons of water directly to the skimmer.

How To Close An Inground Swimming Pool

How To Close An Inground Swimming Pool

3. To avoid metal stains, add MetalFree and Stain and Scale For every 20,000 gallons, add 1 quart of MetalFree and 1 quart (32 oz) of Color and Scale 2 by spraying around pool area.

Swimming Pool Opening Services

4. Adjust the pH to the appropriate level. For all pools, the pH should be between 7.4 and 7.6.

7. Add 1 liter (32 oz) of algaecide per 25,000 gallons by mixing with water in a large bucket and spraying around the perimeter of the pond. Wait an hour before the next step.

8. Maintain the lake at approximately 2 lbs per 10,000 gallons by sending product around the perimeter of the lake.

10. Run the pump for at least one full revolution after adding chemicals. Blow back or manually clean the filter.

How A Gunite Inground Pool Can Change Your Entire Outdoor Living Space

11. Do not pump lake water in our area due to high water tables. Alternatively, you can blow the lines to remove the water from the lines and then use our plugs so you don’t get the water level down.

12. Remove the drain plugs from the filter basket housing, pump, filter tank and heater. Have drain plugs handy, they will be used in step 16.

14. Turn off the main power and remove the enable and disable devices from the timer.

How To Close An Inground Swimming Pool

15. Move the handle of the multiport valve between any two systems. This will ensure that all ports are partially open to allow for the block to expand.

Fiberglass Pool Company In Clarkston, Mi. Also Servicing Howell, Brighton, Pinckney, Hamburg. Michigan. Fiberglass Swimming Pools. Michigan. Artstic Development Sells And Installs Fiberglass Pools And Spas In Southern Michigan

16. Insert all drain plugs into the pump basket and replace the filter cover.

17. When the water is completely drained from the plumbing line, insert the wintering plugs into the return line and skimmer line.

19. Remove all unusual items such as ladders, ropes, overhead skimmers, etc. If you have an automatic pool cleaner, remove and dry it completely. Immediately place the pipes in a frost-free place.

20. Build and tie airbags to a fixed object. An average sized pool, 16′ x 32′, typically requires 4-6 air cushions. If you use multiple pillows, secure them together with the eyelets in the corners of the pillow.

Gunite Pools: Everything You Need To Know

22. If necessary, fill and place bags of water around the edge of the pool. Under normal conditions these can be placed 18 inches apart, but in windy areas they should be placed back to back.

23. During the winter, check the chemical balance every two to three weeks and check the pool water by pulling back the lid slightly. If discoloration or discoloration begins to develop, bring a sample of your water for testing.

24. Please note that any fiberglass or concrete pool leaking without a professional will void the warranty.

How To Close An Inground Swimming Pool

25. This is also a good time to clean the salt chamber and/or change the sand. Your salt egg should be cleaned every six months and the sand should be changed every three years.

Pool Installation Tips

If you want to know more about our pools, give us a call. and telephone 910-429-0086. We provide services throughout North Carolina from Clayton to Benson and Raleigh. You can also visit us at our corporate offices at 3011 Town Center Drive, Suite 130 Fayetteville, NC 28306 or 1629 North Main Street Fuquay Varina, NC 27526. The days are getting shorter and colder. And with that comes the dreaded annual question: Why, when and how should I winterize my in-ground pool? Sure, you can hire a professional company to do it for you, but it costs money.

Also, isn’t physical enough — at least when it comes to entertainment — a big part of the reasons you decide to go swimming?

Yes, obviously shut down the inground pool and prepare for wintery things like problems. But it’s not really big. It’s easy, requires little time, little effort and just follow 11 simple steps. Plus, you’ll be surprised at the satisfaction you’ll feel when it’s all over.

So, stay with us as we seamlessly walk you through the simple process and the next time you can open your own swimming pool with clear, sparkling, and incredibly pleasant water.

Ask The Expert: What Are The Code Requirements For An In Ground Swimming Pool?

Remember that scene in Star Wars, The Last Jedi, when Luke Skywalker crashes his X-Wing fighter into a gross green swamp before meeting Yoda? Well, properly closing and winterizing your indoor pool will ensure that next time you come to open it again, you won’t recreate a George Lucas moment.

It means your pool water and pool equipment stay clean, safe and ready to go swimming again. Plus, it will protect your investment not only from the elements, but also a potentially large repair bill.

A lot depends on where you live when you close your indoor pool. The only thing you want to avoid is closing it too quickly, so you can encourage algae growth. Algae thrive in warm water, so you should wait to close your inground pool until local temperatures drop below 60 degrees Fahrenheit.

How To Close An Inground Swimming Pool

Of course, if you live in a Sunbelt state or a Midwestern state where temperatures are relatively warm (though probably too cool for swimming), you don’t need to worry too much about frost prevention methods. All you need to do is clean and cover your pool and keep your pool pump running all winter long.

In Ground Pools In Nepa

While the following list is comprehensive, what you need to winterize your pool depends on the climate where you live.

Northern and Midwestern states have different needs for the Sun Belt, Southern states, and Midwestern states. The height you live will also make a difference. With that in mind, here’s the full list:

Don’t worry if this sounds like a long list. Most of these will be things you already have that you already use throughout the summer to maintain your pool. Also a few other things you may or may not need depending on where you live.

So, with the basics out of the way, here are 11 easy steps on how to winterize an inground pool, how to make your life easier, and how to winterize and maintain your perfect indoor pool.

Pool Fill & Backfill For In Ground Pools

Pool accessories including all handrails, slides, skimmer baskets, etc. Plastic stairs and handrails, including skimmer baskets, should be removed completely and stored in a dry environment.

Slides, whether metal or plastic, should not be removed as long as they do not affect the ability of the pool cover to fully enclose the pool.

The important thing is to remove as much organic material as humanly possible. So when you shower, be sure to wash the pool floor and walls, including the nooks and crannies where the pool walls meet. The reason for this is that you want to disturb as much sediment as possible and any nearby leaf spores.

How To Close An Inground Swimming Pool

You may need to use a leaf brush to vacuum after you’re done. The type of leaf brush you need depends on whether you have a solid (tile or concrete) or vinyl-lined pool. Here are some we recommend:

Explore Custom Pool Installations In Huntsville, Al

If you have a gas stove with a pilot light, turn off the pilot light. Shut off the gas supply to the heater. If you have a pressure switch, unplug it and detach the hose. Remove the drain plugs and open the inlet and outlet valves to drain all water from the heating system. Turn off all clocks. Turn off the power.

Before adding chemicals or moving forward, it is important that the winterizing process begins with the pool water properly balanced to protect it from limescale, rust and algae deposits during the months that the pool is closed. .

Next, test the water for pH, alkalinity, free chlorine, total chlorine, combined chlorine, calcium hardness, and cyanuric acid. Your regular pool test kit should be more than adequate, but if you want to be 100% sure, you can always take a sample to your local pool company for testing.

Add pool chemicals until you reach the equilibrium ranges shown in the table above. It is more than likely that you already have all or at least most of the chemicals you need to be normal

Inground Swimming Pool Gallery — Inground Pool Design

0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments